Flat Roof Repair & Replacement in Kansas City, MO
Flat and low-slope roofs can't shed water the way a pitched shingle roof can. They depend on a continuous membrane and good drainage. In Kansas City, you'll find them on additions, porches, garages and the commercial buildings covered on our commercial roofing page. Large commercial flat roofs are covered on our commercial roofing page.
Photos of the actual damage before any recommendation.
Scope, materials and price in writing before work starts.
Wind and hail damage documented clearly for your adjuster.
What Is the Best Roofing for a Flat Roof?
The best roofing for a flat or low-slope roof is a continuous membrane, not shingles. EPDM (rubber), TPO (a white, heat-welded single-ply) and modified bitumen (torch-down or self-adhered) are the common choices. The right one depends on the roof's size, slope, how it drains and what's on it. Shingles aren't made for slopes under about 2:12 and leak there.
Signs Your Flat Roof Needs Attention
- Ponding water that sits for days after rain
- Blisters, bubbles or cracks in the membrane
- Seams opening or flashing pulling away at walls and edges
- Leaks at the ceiling below, often far from where the water got in
- Soft spots underfoot, a sign of wet insulation or decking
- Clogged drains or scuppers
Options: Repair, Recover or Replace
| Condition | Option | When it's the right call |
|---|---|---|
| A few leaks, seams or punctures | Patch and reseal | The membrane is otherwise sound |
| Aging but dry membrane | Coating or recover where allowed | No wet insulation underneath |
| Ponding causing repeat leaks | Re-slope with tapered insulation, add drainage | Water sits for days |
| Widespread failure or wet insulation | Tear off and replace | Patches aren't holding |
| Shingles on a low-slope section | Replace with membrane roofing | Porches and additions where shingles keep leaking |
Start Your Roofing Project With Confidence in Kansas City, MO
๐ Call (816) 631-6446Membrane Types
| Membrane | Strengths | Considerations |
|---|---|---|
| EPDM (rubber) | Proven, flexible in cold, easy to repair | Black surface absorbs heat; seams are taped |
| TPO | Reflective white surface, heat-welded seams | Installation quality matters at the seams |
| Modified bitumen | Tough, multi-layer, good for foot traffic | Torch-down needs care near combustibles; self-adhered avoids flame |
What Drives the Cost
- Square footage and how many penetrations and curbs there are
- Membrane type and insulation
- Tear-off, especially if insulation is wet
- Re-sloping or new drains to fix ponding
- Edge metal, flashing and wall tie-ins
- Access for materials and crews
Every flat roof is priced in writing after an inspection.
What to Expect
- 1Inspection: membrane, seams, flashing, drains and any wet areas.
- 2Options explained: repair, recover or replace, and why.
- 3Written estimate.
- 4Work completed, with flashing tied into walls and the shingle roof where they meet.
- 5Water test and cleanup, plus final photos.
Frequently Asked Questions
Can a flat roof be truly flat?
How long does a flat roof last?
Why does my porch roof keep leaking?
More Roofing Services in Kansas City
Serving the Kansas City metro. See our service area.
Get Your Roof Checked Before It Gets Worse
A small leak today can mean rotted decking and ceiling damage later. Tell us what you're seeing. Call (816) 631-6446 or send the form.
- Inspection first, so the fix matches the actual damage
- Clear options and a written estimate before work begins
- Serving Kansas City & the metro (MO & KS)